fairycat jigsawpuzzle 300 pieces (no mmu)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This puzzle has 300 pieces an is a print witch needs 4 dirffrent colours: -Colour 1: up to 2 mm: dark grey, dark blue,…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial
This puzzle has 300 pieces an is a print witch needs 4 dirffrent colours:
-Colour 1: up to 2 mm: dark grey, dark blue, deep red....
-Colour 2: up to 2.2 mm: gold, copper, orange....
-Colour 3: up to 2.4 mm: black
-Colour 4: up to 2.6mm: light grey, green...
you will need the most Fialament of colour 1!
Make filamentswaps at the recomended hight (2mm, 2.2mm, 2.4mm, 2.6mm). The Finished puzzle is about 60 x 45cm tall.
The uploaded picture is my inspirational drawig for the puzzle with minor changes at the finished one. I have beed adeding more stars to make nearly every puzzle location unique. Every puzzle piece fits into every other. There is no boarder, but i am working on it to make one avalible.
Print out piece 1-5 first an see if they fit togehter... The stl numbers are random, so do not expect that for example 21 fits togheter with 22. Exept 1 to 5 they are the upper right corner.
Happy printing and puzzeling
Print instructions
-Colour 1: up to 2 mm: dark grey, dark blue, deep red....
-Colour 2: up to 2.2 mm: gold, copper, orange....
-Colour 3: up to 2.4 mm: black
-Colour 4: up to 2.6mm: light grey, green...
you will need the most Fialament of colour 1!
Make filamentswaps at the recomended hight (2mm, 2.2mm, 2.4mm, 2.6mm)
print with 0.1 mm layerhight