1 / 2
Damper/Riser Feet for CR-6 se or Ender 3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to be printed with TPU. There are 2 versions, one is 32mm tall the other is 46mm tall. You will need to print…
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 95
- Wydruki
- 3
- Wyświetlenia
- 637
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (1)Kolekcje (25)Powiązane
Designed to be printed with TPU.
There are 2 versions, one is 32mm tall the other is 46mm tall.
You will need to print 4 of either.
Print Settings
Printer:
Creality CR-6 se
Rafts:
No
Supports:
No
Infill:
10
Filament:Priline TPU Black
Notes: