Printrbot Metal Plus Foot + PSU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of a remix, The original was from SpannerHands over on Thingiverse.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of a remix, The original was from SpannerHands over on Thingiverse.
Basically it's a pair of feet for your Printrbot Metal Plus with one of them having an LED 12v 30A PSU build in. It allows for the wires to pass through to the underside of the Plus (You will need to drill a hole in the Plus). I have removed the AC inlet I used in my print because it was just one I had and you probably wont have the same one. So you can edit the file to suit what you have.
You have 3 files, Foot with and without PSU and the TPU foot to go on the feet themselves.