Heavy Duty Headphone / Earmuff Holder [Wall Mount]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra strong wall mounted holder for earmuff or headphones.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Heavy duty wall mounted holder for earmuffs or head phones. This holder will accommodate head phones and earmuffs with very wide headbands. The holder also has a large arc to help distribute the weight of the head phones/earmuffs across a longer distance to help prevent flat spots from forming in the headband foam.
The lower gussets help add strength to the design, and has holes for M4 bolts. This design prints in two parts that will need to be bolted together or glued (ideally both). There are counter sunk holes on the back for mounting to a wall with screws.
Recommended Settings:
- Layer Height: 0.2mm
- Vertical Shell (Perimeters): 4
- no supports needed