1 / 3
Rope tightener length adjustment 2mm with Fusion360 files — zdjęcie 1
1 / 3

Rope tightener length adjustment 2mm with Fusion360 files

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adjust rope length and leave 2 holes inserted on each side (photo1) for good enough grip or for extra grip insert the…

Ocena
5 / 5
Polubienia
7
Pobrania
49
Wydruki
1
Wyświetlenia
399
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Adjust rope length and leave 2 holes inserted on each side (photo1) for good enough grip or for extra grip insert the loop in middle 2 holes (photo2)

Tested on 2mm rope (which measured with calipers is 1.8-1.5mm)

Included fusion360 file with parameter to edit hole diameter

Print settings:
For a strong print: 50% triangle infill, 3 perimeters, 0.2mm layer height

Tagi