Dovetail Mount / Mafell Erika 70/85 Table Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dovetail mount for a Mafell Erika 70/85 pull-push saw, to be used e.g. to extend the table of the saw using a wooden…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 952
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dovetail mount for a Mafell Erika 70/85 pull-push saw, to be used e.g. to extend the table of the saw using a wooden plate (16 mm in thickness).
Print Settings
Printer:
Flying Bear Ghost 4
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
50%
Filament:
PET-G
Notes:
For maximum strength of the dovetail assembly, print the top and the bottom part such that the groove of the dovetail guide is pointing upwards.
Assembly instructions:
To assemble a dovetail mount
1. insert an M8 hex machine bolt (e.g. DIN 931 / DIN EN ISO 4014 or DIN 933 / DIN EN ISO 4017) into the hex shaped depression of the top part
2. attach an M8 washer into the corresponding pocket in the bottom part, securing it e.g. with a drop of super glue
3. press an M8 nut into the hand wheel part (which is a tight fit, but you might want to add some super glue anyway)
To build a table extension simply mount a wood plate to the dovetail mounts using two screws each from below. Depending on the size/weight of the plate it might need to be supported on its far end, e.g. using some kind of pillar.