Filament Guide for Prusa i3 Mk3s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My filament enters the lack enclosure from the side which means there is a chance the filament will get snagged on the…
- Ocena
- 4,833 / 5
- Polubienia
- 54
- Pobrania
- 555
- Wydruki
- 7
- Wyświetlenia
- 2608
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
My filament enters the lack enclosure from the side which means there is a chance the filament will get snagged on the z screw during prints. I downloaded a few filament guides from Thingiverse but none fitted my Prusa i3 Mk3s, even with double sided tape (I don't want to superglue anything to my beautiful printer), so I quickly modeled this one. It isn't a complicated design, but meets the need and fits the printer nicely.
Print instructions
This isn't a challenging print, you can print it as you see fit.
the settings I used were:
0.2 layer height
15% infill
No brim
No skirt
I printed it in PETG