Comandante C40 Big Joe knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Comandante C40 MK3/4 Big Joe knob
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1085
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Comandante C40 MK3/4 knob is fine, but I wanted to try the Big Joe. Instead of buying one, I decided to print it :D There's a great model designed by @kaanyaren but it requires a snap-on button with the correct dimensions. Instead of buying a snap-on button I just designed a model that does not need it. My design requires two tiny (15mm x 0.8mm) metal rods which I cut from a paperclip. I used a ~3cm / 1.125" paperclip. You can use a thicker rod. Just add a print pause command on an appropriate layer in your slicer, so your printer stops before printing the top layer. I added a test.stl file you can print and check if your rods will fit.
I've been using this knob for a week and everything looks good till now.
I had an issue with printing lower part (~2-3cm) of the model. The printed part did not cool down enough and was deformed. After forcing part cooling fan (~30-50%) the model printed with no issues.
UPDATE 1
Slightly changed the shape of the knob to make it more comfortable and pleasant to hold.