Flair 58 to Acaia Lunar Adapter Positioner Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low profile, minimalist adapter to hold the Acaia Lunar scale perfectly in position within the Flair 58 base cavity.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 1348
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a minimalistic way to make sure my Acaia Lunar scale would stay put within the Flair 58 base cavity. The holder does not interfere with the function of the scale or the Flair 58. I have the pre-2021 Lunar model so I can't definitively confirm that it will work with the 2021 model.
To install, slightly lift the Flair58 while upright and slide the holder in place. The tabs are there to keep the holder aligned to the Flair but does not snap into it.
My print was done with a 0.6mm nozzle at 0.3mm layer height using PrintedSolid Jessie PLA in Black but any material and print setting should work.