Triforce Extruder Motor Indicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
05/17/2020: Updated STL for a better and more functional fit.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 503
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
05/17/2020: Updated STL for a better and more functional fit.
A simple extruder motor indicator, but in the form of a triforce. It doesn't need to be printed in multiple colors, but it is modeled in a way that the main triangles are further out from the base, so you can do them in multiple colors and get a better effect.
I designed it specifically for a 6X2mm magnet. It has to be deeper than 1mm to fit properly, but anything deeper would work fine. A smaller circumference would work fine as well, but a larger one might not work as well, though with carefully placed super glue it should be fine.
Print instructions
Print it from the "Front" at the bottom, meaning the three triangles at the bottom and the circle in the back at the top. Nothing special after that.