1 / 7
Large pill box with locking slide lid — zdjęcie 1
1 / 7

Large pill box with locking slide lid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A pill box that will hold large pills and keeps them safe and secure

Ocena
5 / 5
Polubienia
38
Pobrania
400
Wydruki
1
Wyświetlenia
2063
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

I printed the original model, and I couldn't even fit my fish oil pill in the slots. I take 10 pills daily, and I wanted something I could throw in a bag without worrying that it'll pop open and spill pills all over.

I changed quite a bit of the original model. The walls were trimmed and I remade the text, I made the inner wall on the text side thicker so pills don't get caught on the slot, made a wedge type lock as well as tapered the edges of the outer wall so it can open and close without breaking the PLA. I also trimmed and tapered the start of the slot so there's room to lift up on the ergonomic grip to open the box. Scaling the original model also scaled the gaps, and I had to adjust the width of the lid so it doesn't come off the tracks because there was about a 1.8mm gap between the edge of the lid and the edge of the slot.

After a bunch of fussing and reprinting, I have something I can use anywhere, and while I'd like to reprint it in PETG, it works just fine in PLA. I'm just worried about it breaking.

Anyway, this is my first remix. Let me know what you think of it. Did I improve the design? Did I overcomplicate things? Should I have just made the pill box from scratch?

Tagi