THE LAST DRAGONSLAYER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the last Dragonslayer. He is the only man that dragons are afraid of.
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 772
- Wydruki
- 4
- Wyświetlenia
- 2692
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is the last Dragonslayer. He is the only man that dragons are afraid of.
It is designed mainly for DLP / SLA printers.
The total height is 100mm(gray resin). The size of the skin resin figurine was reduced to 80%.
I recommend making a model hollow in the Meshmixer and also making ventilation holes. Then add support in your favorite slicing software.
Enjoy his company and don't be afraid of dragons anymore.
Print instructions
A sample print was made on my Anycubic Photon. I used Ameralabs AMD3 resin with these print parameters:
5 bottom layers
70 bottom exposure time (s)
0.03 layer thickness (mm)
4.4 normal exposure time (s)