Artificial Horizon for practicing celestial navigation with Sextant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Part of this is a remix from https://www.thingiverse.com/thing:2123500 uploaded by…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
Part of this is a remix from https://www.thingiverse.com/thing:2123500 uploaded by https://www.thingiverse.com/OE1CGS/about . The reason for the remix is because window glass available locally here in the US would not fit in the slots on the side pieces so I had to widen the slots a little bit, I also added a stiffener along the bottom edge of the side pieces. I also designed a lid for the AH so that you can store the glass and side pieces in the bottom then put the cover over the entire assembly for storage.
Print Settings
Printer:
Maker Farm 12" i3v
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
15%
Notes:
Printed this one in PLA with .4mm nozzle .44mm extrusion width with brim. Sliced with S3D.