Remote Holder (behind TV)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Contains two remote controls one for the TV and a smaller one such as decoder / audio system etc ...
- Ocena
- 4,5 / 5
- Polubienia
- 25
- Pobrania
- 145
- Wydruki
- 2
- Wyświetlenia
- 706
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
The Remote Holder contains two remote controls one for the TV and a smaller one such as decoder / audio system etc ...
All to hang behind the TV, the bracket is not universal given the different characteristics of each TV, but it can also be used without the bracket by placing it in a vertical position.
Two M3x6/8 screws are needed. Usually I don't put nuts but I use the thread in PLA or PETG, but you can add two nuts on the opposite side.
Dimensions Holder 57x56x87h mm max external.
Internal Size :
1° - 52x25x85h mm
2° - 52x21x70h mm
The support bracket has a depth of 32mm from TV to Holder!
In printing, the remote control holder does not need supports, while the TV arm will need supports on the curves with side printing.