Spice Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Configurable spice rack that you can mount on a door on a wall.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 275
- Wydruki
- 3
- Wyświetlenia
- 2308
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This Spice rack is made to be mounted on the wall or on the back of the cupboard door.
This model provides the ends and the middle support section. you will need to get:
- 9mm diameter wood (I used 45cm long pieces)
- 6x25mm for the bottom support (again 45cm long)
- M4x20 wood screws (5 in total - 2 for each end and 1 for the middle support)
You can change the gap between the wall and the round support. The name of the parameter is “jarDiametre”. I recommend measuring the diameter of the jar and put an extra 1 or 2mm.
The height of the round support can also be modified. the parameter is “frontSupportHeight” and is measured from the top of the flat wood to the centre of the round support. Make sure it is high enough to hold the jars and doesn't cover the name of the spices.