Elegoo Neptune 2/2S PSU Casing Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This PSU case mod comes with a front plate that extends the internal space to house a 60mm fan (preferably Noctua)…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 858
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This PSU case mod comes with a front plate that extends the internal space to house a 60mm fan (preferably Noctua) with a depth of 25mm (compared to the 15mm of the stock one) with the possibility to use an additional fan silencer (for example https://www.thingiverse.com/thing:4931122 / https://www.printables.com/model/84197-60mm-exhaust-fan-silencer-flowmaster-psu-ender3nep ).
The lower part (“Switch housen”) has been extended to reach down to the aluminum profile for increased stability, and the hole for the power cord has been moved backward and to the side wall. These changes creates a larger clearance between the build plate and the PSU so it doesn't risk collision.
The models are made with the 3D models from Elegoo (http://69.195.111.207/tutorial-download/?t=FDM_Neptune2_and_2D_Source_File_Date) as reference.
A print of the front has been made but due to bad adhesion, are there no good pictures to show. Although, it fits like a glove. There will be pictures as soon as i have made successful prints of both parts.
Update 1 (2022-08-22): Added STEP file for easier modding for those interested in that. Go nuts!
Print Settings
Printer:
Elegoo Neptune 2S
Rafts:
No
Supports:
Yes
Resolution:
0.1 mm
Infill:
100%
Filament:
Marble
Category: 3D Printer Parts