1 / 1
Another remoteholder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I needed one to hold my projector remote, so the contest came to the right time, here my version. It is a rather simple print, the only “challenge” is, that it is slim and high, so without brim, it might topple over.
I always use some useful-looking standard prusa settings to give you a rough number of what to expect in print time and material needed. But I have no Prusa, so my printer uses slightly different settings, but the ones chosen in the 3mf file are close to mine, which were used for my own make (see picture)
| Category | Setting | Comment |
|---|---|---|
| Nozzle | any | in range 0.25-0.8mm none should be problematic (tested with 0.6mm) |
| Layer height | any | simply use your personal preference |
| dimensions | ~6.5cm x 3.2cm, z: 9.5cm | |
| support structure | none | no visible overhangs, but brim is recommended |
| perimeter | 2 or more | remotes are not heavy, therefore no sturdy print needed |
| infill | 0-15% | see above |
| material | all nonflex materials work | |
| complexity | easy | every printer should be able to deal with this model |
| extra items | screws | screws, screwdriver (magic, sonic or regular), and, well, a remote |