Rotating Stars Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an ornament consisting of 3 stars that rotate independently with spacers and an anchor nut included.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
3 scaled stars that rotate around the vertical axis independently make up this ornament. I added negative volume holes in slicer to all parts to allow for monofilament line and created spacers and an anchor nut to allow it all to hang together correctly.
You can create larger holes using slicer if you want to use something other than monofilament line.
This model prints without supports using mostly perimeters and in 0.30mm draft mode will print in 1h20m, looks and works great in this mode but print in 0.20mm if you wish.
Assembly:
Cut a length of monofilament line and feed the two open ends through the anchor nut and pull through, then feed the two ends through the loop created and pull tight, then:
Feed the ends of the monofilament through the top of each in this order:
- small star
- LONGER spacer
- medium star
- shorter spacer
- largest star
Knot the two open ends together to create a loop to hang from a hook, tree, or whatever else.
.gcode, .stl and .3mf included
Have fun!