OSSC Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are the print and object files for the OSSC Case as created by Laser Bear Industries.
This case fully encloses the OSSC. It vents hot air through the logo at the top of the shell and pulls fresh air in through the bottom using heat convection.
All features of the OSSC are available to the user, The JTAG has a removable cover, and the audio port selector has a removable lever actuator that can be used if needed.
The original print files are here: https://www.laserbear.net/pages/downloads
These files fall under Creative Commons Non-Commercial License Remember to provide credit and link back to laserbear.net
Find out more here http://creativecommons.org/licenses/by-nc-sa/3.0/
If you'd like a premade one, Laser Bear Industries sells them at their store:
https://www.laserbear.net/products/ossc-case
----------------
I'm re-uploading and distributing these files here under the CC license terms.
To assemble this case, you'll need 4 M3 screws, anything between 15mm to 25mm in length should work.
Note 1: Because of the board and component variations, the upper part of the case doesn't fit with the Mcbazel version of the OSSC, as the buttons are too tall to allow the case to close, and the audio select switch is on the wrong side of the board. This case should work with the LiNKFor and Kaico models, judging by the pictures.
Note 2: I would not recommend printing this in PETG because the “OSSC” letters on top are designed to be used as vents, and PETG too easily gums up the holes.