Counter stool stilts to prevent vacuum robot from getting caught on legs - Walker Edison counter stools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stick these to your Walker Edison counter stools to prevent your vacuum robot getting caught on the legs
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
My Roomba was getting caught on the horizontal bars on the legs of my counter stools, so I built these “stilts” to raise the height of the bars slightly so that the Roomba's bump sensor can detect them and the Roomba doesn't try to go over them.
These friction fit onto the existing feet of the counter stools, just print and stick them on. You can edit the parameters in the .scad file to customize for your bar stools if you have a different brand.
Inspired by https://www.ctrl.blog/entry/robot-vacuum-drying-rack.html who was in turn inspired by https://www.printables.com/model/151700-laundry-rack-raiser-for-vacuum-robot-minimal-16mm-