CR-10S Pro Mirroed BMG Direct Drive Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a mirrored BMG extruder that I bought from Bondtech as part of the Creality3D CR-10S PRO Extruder Kit
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Summary
I have a mirrored BMG extruder that I bought from Bondtech as part of the Creality3D CR-10S PRO Extruder Kit
I found this CR10S Pro direct drive by Achocho conversion that I could remix to work with the mirrored extruder. I also added a Bowden Tube Adapter that allows you to have a Bowden tube between the runout sensor and the extruder. This Bowden tube will help to reduce the stress on the filament while printing.
If you are using a MicroSwiss extruder, you need a 58mm piece of Bowden tube. The design should also work for the stock extruder, but I don't how long the Bowden tube needs to be.
Print Settings
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: 33%
Filament brand: Amazon Basics
Filament color: RED
Filament material: PETG
Notes:
I used PLA and a 0.1 resolution for the Bowden tube adapter to make sure the threads were good