1 / 3
Ventilation grille 120mm built-in (Griglia di Ventilazione)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created a ventilation grille to replace some old damaged grids.Conical joint
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 410
- Wydruki
- 2
- Wyświetlenia
- 1267
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (55)Powiązane
Ventilation grille 120mm built-in
I created a ventilation grille to replace some old damaged grids.
Conical joint.
Print Info
Without supports.
layer: 0.2mm
infill: 15-20%
material: PETG or ABS for better outdoor strength maybe ASA would be better.
(if exposed slightly outside or inside it can also be printed in PLA)