Drag Chain with Ender3 S1 Brackets included. (updated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on a fully scalable modular drag chain for the Ender 3 S1 series. Stationary bracket improved.
- Ocena
- 4,667 / 5
- Polubienia
- 66
- Pobrania
- 361
- Wydruki
- 3
- Wyświetlenia
- 2916
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My take on a fully scalable modular drag chain for the Ender 3 S1 series. Just had to try since my ribbon cable seemed to want to bend in two specific places only. This fixed my problem.
For the Ender 3 S1 Pro, 12 chain links is needed along with 26 chain locks.
If you end up with the Chain lock nubs breaking try lowering the Layerheight or increase the infill to make them a bit stronger.
Another trick is to try using Curas "slicing tolerance" set to "Exclusive" to force the nubs to become a fraction smaller in diameter.
The Hotend cable bracket is a modification of the design from Wojciech Kawa found here :
https://www.printables.com/model/281061-ender-3-s1-cable-holder
there is altso a generic bracket file included should one want to use the chain elsewhere..
Scalable in fusion 360 that is. 360 file is attached.
Locks with a piece of filament string.