Akro-Mils Bin 10164
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bin for Akro-Mils parts organizers. Fits my 10726, my 10164 and my 10144 units
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 123
- Wydruki
- 0
- Wyświetlenia
- 845
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
For years, I've needed one replacement bin for my Akro-Mils 10726 parts organizer. I came up with this replica of the original bin and it worked great on the first attempt and fits my 10726, my 10164 and my 10144 units.
The bin seemed slightly sloppy in the width and height so I edited the design and uploaded ver2 which is 1mm wider, 0.5 mm taller and has a 0.5mm thicker finger hold (mine wanted to crack here while removing supports). I have not printed ver2 since ver1 works perfectly fine for me. If someone tries ver2 and thinks it works better, please comment.
Sadly, to be a 100% replica, you MUST print with supports.
Be very careful and take your time so that you don't damage the thin print when removing the supports.
Can you find the printed version?
This also works with popular dividers you can find on Thingiverse.
