Featherboard for Parkside tablesaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A featherboard for the Parkside tablesaw model PTK 2000 E3. Should be compatible with other models with same guide rails
- Ocena
- 5 / 5
- Polubienia
- 116
- Pobrania
- 565
- Wydruki
- 6
- Wyświetlenia
- 2134
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I was looking for this part but found nothing compatible with my Parkside tablesaw guide rails (ref PTK 2000 E3), so I quickly designed one.
It should be compatible with other models with same guide rails.
You will need two M5x40 screw and nuts (I only had M5x50 when I took the illustrating picture), plus two large M5 washers.
Please look at the appropriate manual provided with your equipement for all the security warnings relative to tablesaw usage.
I may briefly notice two fondamental points with featherboards usage :
1/Featherboad must be positionned before the rotating blade. Not side by side with the blade, and not after the blade
2/"feathers" must point to the operator's opposite direction
See a quick usage example here :
Enjoy and please feel free to leave comments and suggestions to improve this model.