Ender 3 Filament Runout Sensor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament runout sensor mount for the Ender 3/Pro/v2 which replaces the original plastic X motor mount/endstop cover.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 541
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This model replaces the original X-axis motor mount/belt cover with one that adds a filament runout sensor. The switch used for this build is a HiLetgo KW12-3 Roller Lever Arm Micro Switch. Also required are 2 standard 4mm Bowden collets. The switch is mounted with 2xM2.5x10mm self-tapping screws.
The updated version of this mount can be printed entirely without supports. The original X-axis endstop mounts to this part using the original screws. If PLA is used, be extra careful when screwing in the endstop, to avoid breaking off the screw bosses. PLA+ or PETG is recommended instead for this reason. Printing at a 0.2mm layer height is HIGHLY recommended, as several of the tolerances are tuned for that layer height, and printing at a different layer height may cause issues with assembly or usage.