Dual 1/64 Need for Speed Rivals Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The display design is based on HP2010 display I made but it is theme with NFS Rivals.
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 746
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Description
The display design is somewhat similar to the Hot Pursuit one, it should fit all Tarmac Works release of same Mercedes C63 AMG Black Series casting and Matchbox Porsche Cayman casting. If you want the base to fit that casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
- BaseV3.STL
2) Base back wall:
- BoxBackBuild.STL
3) Bonus
- Spikes.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "FlatWall":
1) Start (Lines colour, mine is in white)
2) Layer 4 (Overall road colours, mine is in black)
3) Layer 9 (NFS Rivals logo main colour, mine is in blue)
4) Layer 14 (NFS Rivals logo detail colour, mine is in red)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base, the spikes strip is printed in single colour then coloured by hand. The spike strips is taped on to the display.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Facebook, Instagram or Twitter too:
Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/