Robot soldier from the Voltron Cartoon Series (V2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
3,45 € – 4,22 € netto (bez VAT)
Dla pliku: Voltron_II_80_Sole_0.15mm_PLA_50g_3h50m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,83 € netto (środek widełek).
- Masa podana przez autora
- 48 g
- Czas druku podany przez autora
- 3,83 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
This robot solidier originated from the first seasons of the Cartoon series started in 2016.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This robot is prepared as a 80cm filament print. It is based on the 2016 cartoon series “Voltron”. The robots are the robot soldiers of the evil Zarkon. This model appeared in the later seasons. In the first seasons there was another design. You also can find the earlier type in my printables collection.
The original 3D model was designed by an artist on Fiverr for me. I don't have any art skilles in my genes. So I am happy when some artist can create the models for me … Nevertheless I want to share these with other robot enthusiasts like me.
Full credit for the robot design and the 3D model goes to the artist on Fiverr.
The 3D model of this robot was designed by “dasunmadushanka”. Here is the link to his Fiverr account: https://www.fiverr.com/dasunmadushanka
To mount the parts there are holes included which fit standard 40mm long, 8mm or 10mm in diameter wooden bolts (very rarely also 30mm x 6mm if there was not enough room for larger ones).
I printed the files as prepared, removed the supports and glued the parts together with super glue for the surfaces and mounting glue for the wooden bolts.
There is an additional 3MF file which contains nothing else but some wedges in the shape of the feet. The original orientation of the figure is leaning slightly backwards. So it easily can fall over. So I printed those wedges afterwards and glued them to the bottom of the feet to provide a more stable stand.
Also included is the uncut STL file … so you can scale the robot to your needs.
Enjoy