Orange Pi 3 LTS Chonky Boi Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix for the original, which was done by Mexusbg - allows for internal mounting of 4010 fan
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This was a remix that I did to place the fan inside of the case, as opposed to having it externally-mounted.
Use a standard 4010 fan and it will fit the bolt pattern.
Additionally, this was designed for M3 socket head bolts at the corners. The original appears to have been designed for M2 hardware.
Huge thanks to Mexusbg for designing the original. I would have never had the wherewithal to tackle my first remix if you hadn't done such a great job with the original.
This can be printed without supports. Suggest five bottom and top layers, which gives the primary strength across the board.
This was done on my CR-10V3, at speed 60mm/s for primary print moves.