1 / 1
Bondtech LGX Shortcut Mosquito Fan Duct for Prusa MK3S/+ — zdjęcie 1

Bondtech LGX Shortcut Mosquito Fan Duct for Prusa MK3S/+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fan Duct for the Bondtech LGX Shortcut Mosquito with the Prusa MK3S/+

Ocena
5 / 5
Polubienia
28
Pobrania
207
Wydruki
2
Wyświetlenia
1646
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This STL was supplied to me by Bondtech since it is not available on the site, and the Bondtech SHORTCUT mosquitoExtruder/hotend Accessory Pack has not been available in the US for some reason. Also, the fan shroud is not sold separately from the Accessory pack.

NOTE: This is for the Slice Engineering Mosquito version, not the copperhead.

I printed mine in Siraya Tech Sculpt High Temp Resin - Grey

I have not attempted FDM printing this, but I do not see why it would not work. I'd recommend ASA or ABS (depending on the brand of ABS, I usually start by growing the object 1% in the slicer to correct for shrinkage)

UPDATE 2: I apologize. The original stl published here was incorrect. I have uploaded the correct Fan Duct STL

Tagi