Raspberry Pi 4 B Case with 2020 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified version of https://www.thingiverse.com/thing:3033216 to suit the Raspberry Pi 4 B, which has a…
- Ocena
- 4,857 / 5
- Polubienia
- 55
- Pobrania
- 681
- Wydruki
- 8
- Wyświetlenia
- 3414
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is a modified version of
https://www.thingiverse.com/thing:3033216
to suit the Raspberry Pi 4 B, which has a different port layout meaning Pi 3 cases won't fit. I've also added an additional opening in the lid to accommodate the PoE hat, with a small amount of strengthening due to the opening location.
0.2 layer height works well and support is required under the 2020 rail but no where else. I printed with 20% infill but it doesn't really matter as there is very little infill.
19/05/20 - Added a lid to enable mounting of a 30mm fan.
Print instructions
0.2 layer height with support under the 2020 rail, I printed with 20% infill but there is very little so it won't make much difference.