Laptop Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple laptop stand that you can customize by changing infill pattern and density.
- Ocena
- 5 / 5
- Polubienia
- 124
- Pobrania
- 1571
- Wydruki
- 8
- Wyświetlenia
- 7634
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple laptop stand where you can print it without any top and bottom layers and play with the infill patterns and density to produce cool different stands.
Also, you can increase or decrease the height of the model in the slicer, allowing to have only one piece holding the laptop or more than one.
It rises the laptop monitor about 16~17 cm (depending on the laptop).
I've printed with the following settings:
- Perimeters: 4
- Layer Height: 0.28
- Solid layers
- Top: 0
- Bottom: 0
- Infill density: 5% (as far as I remember)
- Infill type: Honeycomb
Note: This was designed to fit perfectly on an Asus Pro 2440U although it can fit different brands and models.