Rubber Feet Extender / Raiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was pretty annoyed that my routed cables were being squished between my table and the printer frame.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 751
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I was pretty annoyed that my routed cables were being squished between my table and the printer frame. That's why I designed these extenders for the rubber feet in order to elevate the printer by 28mm so as to no longer squish my routed cables.
To assemble, use one M3 nut and one M3x20 countersunk screw to secure the latch to the body, then insert the original rubber foot into the body.
Installation is done the same way as the original foot, simply insert into the extrusion and rotate 90 degrees.