OSVAC Cyclone for Buckets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello, If you like this Thing please leave a like and let me know. I remixed a Cyclone for the OSVAC System.
- Ocena
- 4,5 / 5
- Polubienia
- 61
- Pobrania
- 320
- Wydruki
- 3
- Wyświetlenia
- 2224
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Hello,
If you like this Thing please leave a like and let me know :-)
I remixed a Cyclone for the OSVAC System.
Thanks to Hobbyhimmel for the great OSVAC Projekt.
For the VAC i used a female adapter to easier Print, but you can place a genderchanger like you see on the pictures if needed.
The hole in the bucket is a snugfit with 60mm and glued with sealingmass - holds very strong also without screws.
I Printed with suppports on the buildplate.
Works realy good on all my Handmachines Tablesaw Bandsaw Drill etc.
For a Planer i guess its to low dimensionated and will clogg, but i didnt try it.
For more vacuum stability i recommend to use 2 Bucks - glued one in the other is very stable.
I remixed and shrinked the model so it also fits in my FLSUN Q5 Buildplate as a single Thing.
Remix from:
https://www.thingiverse.com/thing:2018105
Category: Parts