JBL Charge 2+ hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a hanger for my JBL Charge 2+ speaker for my wooden boards wall (another DIY project).
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 1150
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a hanger for my JBL Charge 2+ speaker for my wooden board wall (another DIY project). As this is a bit unusual case I designed my own hanger.
I've tested the shelf version - you can see the stress test on pictures - the speaker hanging on a single hook.
There are 3 options to select from:
jbl_vertical_hook.stl - the original design to hang on a vertical element, like bedhead
jbl_horizontal_A.stl - to hang on a 18mm shelf, whole speaker under the shelf
jbl_horizontal_B.stl - to hang on a 18mm shelf, the speaker moved to the front, better balance
If you need yet another option - drop me a comment with specs :) Of course, you need to print a pair of a given type to use is safe.
If you like my design do not hesitate to visit my YT channel - @taboretum
Print Settings
Printer:
Kossel Mini
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament:
Notes:
I used ABS beta version for quite some time, now I've printed these in PETG with 20% infill and double perimeter - they are strong enough.