Marbles and Jokers Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A take on Pegs and Jokers but using marbles. This board was designed to hold a basic 16mm marble and supports down to…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 1086
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
A take on Pegs and Jokers but using marbles. This board was designed to hold a basic 16mm marble and supports down to 3 player board configurations, and up to as many as you need. If anybody doesn't like the missing wedge in the corner when playing more than 3 players, let me know and I'll post a set without the 30 degree slant and additional marble notch.
Supports are necessary but I did not include supports in the inside of the joints between the segments. And that was just because it is such a narrow space to try to remove support material.
Included the full piece for people with printers large enough, as well as segmenting it into 3 sections, all of which have 3 files. One file is the complete section, and two files for multi material printers to be able to do two colors.
if you need rules, try something like https://www.pagat.com/race/pegsandjokers.html
Print Settings
Printer Brand:
FlashForge
Printer:
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
20%
Filament: FlashForge, Paramount 3D, Monoprice PLA
Category: Games