Hue Play mount for TV or something else
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for Philips Hue Play lamps. It is screwed into the holes of the TV wall mount.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1028
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This mount was designed to attach the Hue Play lights to on my TV, but it can be attached to a wall or whatever you want.
The Part named “hue mount” can be screwed into either the middle hole or the top/bottom hole of the light. You can use the original screw from the lights.
Additional parts (for each mount):
- 1 x screw which fits your tv mount (in my case it was an M8 x 20 mm) + washer
- 1 x M6 x 20 mm screw + washer
- 1 x M6 threaded insert (I've used the ones from Ruthex)
The threaded insert is pressed into the part which is mounted on the light.
I've printed both parts without supports and with 0.2 mm layer height in PETG. Both parts stood on the faces which are in contact when the mount is assembled.