Staff Whacker 5001 - Nerf Blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable Nerf Blaster that uses 2x 12x40mm compressions springs and a FLUM nicotine vape packaging tube without label
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 678
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Using a clear tube from a FLUM vape device, and 2x 12x40mm compression springs, 4x M3x10 Screws w/Nuts, 1.75mm Filament as a dart rest/block, and 10-32 allthread. This device relies on the flexible/compliant nature of plastic, in order to provide a trigger mechanism, and is optimized for PLA.
There is ample room between the piston base and the tube end cap, to allow for standard nerf springs to be used, I think. I don't have one to check with..
Print 2x of the Tube Cover STL if you do not use the plated files in the PrintedParts.stl
Here's a video of my using it, since apparently Printables doesn't support videos in the model gallery - https://imgur.com/v112oeP.mp4