1 / 7
Wiper arm cap for Nissan Navara (Pathfinder?) circa 2008 model
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the plastic cap that goes over the nut that holds the wiper arm on a Nissan Navara 2008 model.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 1170
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (30)Powiązane
This is the plastic cap that goes over the nut that holds the wiper arm on a Nissan Navara 2008 model. The original cap has a shorter cylinder, but the design to hold these things in is a bit rubbish, so I made the cylinder longer so that it stays in. This may mean that you need to print it in flex (as I did here). Other materials might work, but I haven't tried.
If you like my design, you can buy me a coffee!