1 / 4
SSD to HDD Hot Swap Carriage Adapter — zdjęcie 1
1 / 4

SSD to HDD Hot Swap Carriage Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This SSD adapter was 3D printed to accommodate a standard sized SSD drive and give it the exact footprint of a full…

Ocena
4,667 / 5
Polubienia
35
Pobrania
249
Wydruki
3
Wyświetlenia
1321
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

This SSD adapter was 3D printed to accommodate a standard sized SSD drive and give it the exact footprint of a full size HDD. This can be used for all hot-swap bays usually found on a server type chassis, as it will fit the form factor of a normal HDD and the SATA connections will line up as well. In my case I needed this to fit into a hot-swap bay on a 3U server. You will need qty 2: M3 x 6 screws

Print Settings

Printer Brand:

MakerGear

Printer:

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.3mm

Infill:

15%

Filament: Amazon Basics PETG Black

Category: Computer

Tagi