Print-in-Place Siren Whistle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just to see if it could be done - it can. Maybe not the best sound but an interesting design and print challenge.
- Ocena
- 3,667 / 5
- Polubienia
- 62
- Pobrania
- 655
- Wydruki
- 7
- Wyświetlenia
- 2582
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Layer height form 0.1-0.2mm work fine. Do not add support. There are two small supports already there under the double-conical rotor for support as it's printing, just remove those after.
After printing gently-ish work the rotor around, back and forth until it spins from blowing through. I used a small screwdriver from underneath to add a bit of pressure to work the parts in a bit. After it spins by blowing through, a small dot of oil added to the shaft area from the bottom will help it spin well.