i3 MK2/S Clone PSU Holder for Meanwell LRS-350-12
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I built my clone of the Prusa i3 MK2/S, starting loosely off Tom3d's "Tom's Dolly Build".
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 1033
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I built my clone of the Prusa i3 MK2/S, starting loosely off Tom3d's "Tom's Dolly Build". But his project set out to be the cheapest possible- and I wanted mine to be as close to the real thing as possible. I used a Meanwell LRS-350-12 power supply, and this would not fit in the standard PSU-cover part, so I modded it in tinkercad, and now I've got a part here that works. I had to also make a spacer, because my build used a wood frame, and the Z-axis motor mount bolts would otherwise interfere. Hope someone else gets some enjoyment out of this part!
Print instructions
I printed mine using Prusaslicer, and set the infill for 20% rectilinear. I used PLA.