Arylic Up2Stream Pro v3 Enclosure with Lid, Pegs, & snap Simplified
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on Arylic Up2Stream Pro v3 Enclosure with Lid by Corduroy_Pantaloons. Changes: added pegs in to allow for the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Based on Arylic Up2Stream Pro v3 Enclosure with Lid by Corduroy_Pantaloons.
Changes:
added pegs in to allow for the board to go in without needing screws.
Removed the slit on the side making for a simple look with intention of the antenna being attached to the lid on the inside.
Removed excess hole next to USB port.
V1.1: Adjusted position of pegs to fit board properly
V1.2: added IN & OUT text
V1.3: added a snapping system for the lid
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Resolution:
.28
Category: DIY
