Power Section Rotor Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Card holder in the shape of a power section rotor.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Card holder in the shape of a power section rotor. A power section rotor coverts the pressure and flow from the drilling mud/solution to Torque and Rotation. This happens by the hydraulic pressure of the mud/solution being pumped and pushed into the cavities between the Rotor (red in video) and Stator (blue in video). This allows the drill bit to spin without the whole drill string having to spin.
No supports needed, this model uses bridging to make the overhangs happen. You will see some artifacts on those overhands (picture below) but they are in small insignificant places (They will also only be on the side that is printing on the top). If you dont want to see the artifacts then feel free to use supports.
