Miata visor delete plate with RAM ball mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1" RAM ball mount that screws into the windshield frame to delete/replace the visors. Fits NA and NB Miatae.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 121
- Wydruki
- 1
- Wyświetlenia
- 619
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
1" RAM ball mount that screws into the windshield frame to delete/replace the visors. Fits NA and NB Miatae.
Print Settings
Printer:
Flying Bear P902
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.1mm
Infill:
25% or more
Notes:
Must have LOTS of cooling fan to do with PLA, as the lower half of the sphere where the steepest over hangs are want to droop. I dont recommend PLA for this reason, as well as for warmer climates as it will get soft in the summer heat.
Prints fairly easily with ABS at 60mm/s, no fan.Can use supports if you like but I havn't found them necessary with ABS, but will help with PLA if you don't have sufficient cooling.
I recomend that you do not use slic3r as it prints the outside perimeter first and cant handle over hangs as well as others. Use cura or craftware.
Category: Automotive