STONE PUMP HOUSE HO SCALE (1/87th) MODEL RAILROADING
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HO scale track side building.
- Ocena
- 4,5 / 5
- Polubienia
- 52
- Pobrania
- 274
- Wydruki
- 2
- Wyświetlenia
- 1029
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This STONE PUMP BUILDING is printed as a single unit. It will take 7+ hours to print, but the wait is a very satisfying model for your layout. It is printed with Prusament PLA. Print the main structure in the color filament that represents the mortar, black, grey or white. Then paint the stones of varying earth colors carefully. Paint the windows then install. The roof rafters are simply glued at the roof hip. If you plan to light the model make sure you paint the inside black so the walls do not glow. Cover the roof rafters with Plastruct roof sheathing of your choice, metal, corrugated, shingles or tile.
If you would like to contact me directly via email: [email protected]