Party hat cockroach bobble head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Party hat with a cockroach bobble head. Has straps so a band can be attached to have it on your head.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 901
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
A pest exterminator themed miniature party hat with a cockroach bobble head for effect. The hat has straps on the inside where a string can be attached to keep it on your head.
I recomend using the attached gcodes as they are prepared to handle overhang and bridging.
The cockroach and rat are attached with M2 screws and nuts.
The cockroach parts needs to be glued together with the M2 screw in the foot. The head of the screw goes in to the inset on the top, the spring is glued into the two slots of the foot and the top of the spring into the inset of the cockroach.
The rat has an inset slot to push the nut in, the screw I used is 12 mm long.