STONE SIGNAL TOWER HO SCALE MODEL RAILROADING
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This track side building will add a realistic structure to your layout.
- Ocena
- 4 / 5
- Polubienia
- 99
- Pobrania
- 518
- Wydruki
- 2
- Wyświetlenia
- 1615
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This STONE STONE SIGNAL BUILDING is printed as a single unit. It will take many hours to print, but the wait is a very satisfying model for your layout. It is printed with Prusament PLA. Print the main structure in the color filament that represents the mortar, black, grey or white. Then paint the stones of varying earth colors carefully. The window fillers come in two units for each wall, horizontal and vertical. Do not cut the windows apart as they are pre-aligned for each wall, simply remove the BRIM where necessary to fit and align properly. These are glued back-to-back (smooth side to smooth side) and then painted and installed in the model. The corrugated four roof panels are simply glued together and painted. If you plan to light the model make sure you paint the inside black so the walls do not glow. The stairs are included with this model.
If you would like to contact me directly via email: [email protected]