Ghost in the Shell:SAC Laughing Man Extruder Visualizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I thought what I'd do was design an extruder visualizer that looked like the Laughing man logo.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 685
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I thought what I'd do was design an extruder visualizer that looked like the Laughing man logo.
This is an extruder visualizer based on the laughing man logo from Ghost in the Shell:Stand Alone Complex.
It does take a few minutes to clean up if printed the way I did with the face on the top to get the best inner surface. I added a center pin to help with alignment. I also tried to space it a little farther away from the motor to allow some airflow.
Print instructions
I forgot to orient the model before uploading but I printed with the front faces up to get a better detailed finished surface. unfortunately this will require some cleanup of supports. There is an alignment pin in the design and I used an 8X3mm magnet which will align with the post on the back of the inner text plate.