Reuleaux Triangle Scotch Yoke
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, press-fit scotch yoke using a reuleaux triangle -- M.M.#135
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Drew this up after seeing 507 Mechanical Movements #135 and thought it would be a great way to demonstrate what a reuleaux triangle is. You need to print 1 of everything except for the arm clamps which you need two of. This snaps/friction locks into place, no glue is required.
The wheel titled 'Wheel (As Seen In Mechanical Movements #135)' behaves as it would in this animation, http://507movements.com/mm_135.html, on the other hand the wheel titled 'Wheel' behaves as a normal scotch yoke would.
This is similar to a previous project of mine which was a typical scotch yoke which in my experience spins more freely than this you can find it here:
OnShape project: https://cad.onshape.com/documents/4b4d6d5c149bf0431305b0a8/w/834948860446948d1551d8f4/e/212924cff2a15ac85add5fae
Category: Mechanical Toys